Fenix BC06R Reference ManualUpdated 27 minutes ago
The Fenix BC06R is a smart-brake bicycle taillight. This summary is drawn from the manufacturer's official user manual — see the downloadable PDF reference manual on the product page for complete details.
Warning
- The taillight is a high-intensity lighting device capable of causing eye damage to the user or others. Avoid shining the light directly into anyone's eyes.
- The LED of this light is not replaceable; the light will need to be replaced when the LED reaches the end of its lifespan.
Overview
- Smart brake sensing function — Braking output is 90 lumens with a 100-meter alerting distance
- Can be mounted on saddle rails or seatposts, with a quick-release structure for fast assembly/disassembly
- Built-in 560mAh battery, USB Type-C charging
- 270° lighting angle; multiple lighting modes to choose from
- Battery level indication; single-switch operation
- Size: 1.50'' x 1.50'' x 1.50'' / 38 x 38 x 38 mm (excluding mount). Weight: 1.57 oz / 44.5 g (including battery)
Operating Instructions
On/Off: press and hold the switch for 0.5 seconds to turn the light on/off.
Output Selection: with the light switched on, single click the switch to cycle through (Low) Constant-on → (Low) Slow flashing → (Low) Fast flashing → (High) Constant-on → (High) Slow flashing → (High) Fast flashing → Spinning.
Mode Switching: a sudden reduction in riding speed automatically triggers Braking mode; after two seconds the light recalls the previously used output. The light also memorizes the last selected output (excluding Braking) for next time it's turned on.
Charging
Turn off the light, open the anti-dust cover to reveal the USB Type-C port, and connect the charging cable. The indicator displays red while charging and turns green when fully charged — be sure to close the anti-dust cover afterward to maintain dust/water resistance. A full charge from depleted takes about 2 hours; recharge a stored light every four months to maintain optimum battery performance. The Constant-on Low mode can be operated while charging, but this prolongs the charging time.
Battery Level Indication
Each time the light is turned on (or via a single click while off), the indicator shows the battery status for 3 seconds: green on (saturated, 100–85%), green flashing (sufficient, 85–50%), red on (poor, 50–25%), red flashing (critical, 25–1%).
Technical Parameters
- Spinning: Output 10 lm, Runtime 22h, Intensity 5 cd
- Low (Constant-on / Slow flash / Fast flash): Output 10 lm, Intensity 5 cd — Runtime 12h30m / 14h30m / 24h30m respectively
- High (Constant-on / Slow flash / Fast flash): Output 30 lm, Intensity 15 cd — Runtime 5h / 5h / 8h respectively
- Braking: Output 90 lm, Intensity 30 cd
Alerting Distance: 100 meters | Lighting Angle: 270° | Impact Resistance: 1.5 meters | Waterproof: IP66
Note: Specs measured by Fenix using one built-in 560mAh battery at 21±3°C / 50–80% humidity; real-world performance varies.
Low Voltage Warning
When the voltage drops below 3.0V, the light downshifts to a lower brightness level and the battery indicator blinks red at 3Hz. The light will not turn off automatically and will keep working until the battery runs out.
Mounting Instructions
Seatpost mount: loop the mounting strap (without LOGO) around one attachment ear, place the mount (silicone pad thinner side up) on the seatpost, then loop the other end (with LOGO) around the other ear and adjust to size. Attach the BC06R to the mount with the switch facing upward. Applicable to seatpost diameters between 25.4mm and 31.6mm.
Saddle rail mount: place the mount on the saddle rails, thread a fastening tie through the top hole on each side to secure it to the rails, trim excess, then attach the BC06R with the switch facing upward. Applicable to saddle rail distances between 39.0mm and 50.0mm.
Usage and Maintenance
- Disassembling the sealed head can cause damage and will void the warranty.
- Recharge the battery promptly to ensure normal use next time, and recharge a stored light every four months.
- Flickering, intermittent shining, or failure to illuminate is usually due to a poor battery level — recharge the battery.
- If issues persist, contact your authorized distributor.
What's Included
Fenix BC06R bicycle taillight, saddle rail mount, 4 fastening ties, seatpost mount, mounting strap, USB Type-C charging cable, user manual, and warranty card.