Fenix Support logo
Fenix Support logo

All articles

Fenix E01 V2.0 Reference ManualUpdated an hour ago

The Fenix E01 V2.0 is an ultra-compact AAA keychain flashlight. This summary is drawn from the manufacturer’s official user manual — see the downloadable PDF reference manual on the product page for complete details.

Product Features

  • 100 lumens maximum output, powered by a single AAA battery
  • Ultra-compact size for everyday carry
  • One-handed operation via the rotating switch
  • All-metal CNC-machined light body with premium HAIII hard-anodized finish
  • Size: 2.62" x 0.59" x 0.55" / 66.5 x 15 x 14 mm
  • Weight: 0.46 oz / 13 g (excluding battery)

Technical Parameters

Specifications below reflect Fenix's lab testing with the included Pairdeer alkaline and a 750mAh Ni-MH battery at 21±3°C / 50-80% humidity. Actual performance varies by environment and battery used.

  • High: Output 100 lumens, Runtime 50 minutes* (alkaline) / 50 minutes* (Ni-MH), Distance 35 meters, Intensity 304 candela
  • Med: Output 25 lumens, Runtime 4 hours (alkaline) / 4 hours 30 minutes (Ni-MH), Distance 19 meters, Intensity 88 candela
  • Low: Output 5 lumens, Runtime 25 hours (alkaline) / 23 hours (Ni-MH), Distance 9 meters, Intensity 21 candela

Impact Resistance: 1 meter   Waterproof: IP68, 2 meters underwater

Battery

Uses one AAA battery. Recommended: Ni-MH (rechargeable). Usable: Alkaline or non-rechargeable Lithium AAA. Do NOT use rechargeable Li-ion 10440/10450 batteries — banned for this light.

Operating Instructions

On/Off: Tighten the light head to turn on the light; unscrew the light head to turn off.

Output Selection: Unscrew the light head and re-tighten it within one second to cycle through Low → Med → High.

Intelligent Overheat Protection

The light accumulates heat on High output over extended periods. To reduce temperature, it will automatically step down a few lumens; High can be reselected once cooled.

Usage and Maintenance

  • Disassembling the sealed head can damage the light and voids the warranty.
  • Use a high-quality battery.
  • Remove the battery if the light will not be used for an extended period, to avoid damage from electrolyte leakage or battery explosion.
  • Long-term use can wear the O-ring; replace with an approved spare to maintain a proper water seal.
  • Periodically clean the battery contacts — dirty contacts can cause flickering, intermittent operation, or failure to illuminate.

What's Included

E01 V2.0 flashlight, Pairdeer AAA battery, key chain, spare O-ring, user manual, warranty card

Warnings

  • This flashlight is a high-intensity lighting device capable of causing eye damage. Avoid shining it directly into anyone's eyes.
Was this article helpful?
Yes
No