Fenix E06R Reference ManualUpdated an hour ago

The Fenix E06R is a keychain light with white, UV, and red laser light sources. This summary is drawn from the manufacturer’s official user manual — see the downloadable PDF reference manual on the product page for complete details.

Product Features

700 lumens maximum output and 110 meters maximum beam distance
Two Luminus SST12 main LEDs, 50,000-hour lifespan each
Built-in 750mAh rechargeable battery
Three separately controlled light sources: white light, UV light, and red laser
Red/Blue/RGB breathing light ring for varied lighting needs
Flat body design for a comfortable grip; keychain hole and included belt clip
Magnetic tail for hands-free use
USB Type-C charging with inner waterproof treatment
Solid all-metal CNC-machined body with premium HAIII hard-anodized finish
Size: 2.72" x 1.14" x 0.63" / 69 x 29 x 16 mm
Weight: 1.90 oz / 54 g (including battery)

Technical Parameters

Specifications reflect Fenix's lab testing with the built-in 750mAh battery at 21±3°C / 50-80% humidity. Actual performance varies by environment.

High: Output 700 lumens, Runtime 1 hour 20 minutes*, Distance 110 meters, Intensity 3100 candela
Med: Output 150 lumens, Runtime 2 hours 50 minutes, Distance 50 meters, Intensity 645 candela
Low: Output 30 lumens, Runtime 12 hours, Distance 23 meters, Intensity 130 candela
Eco: Output 5 lumens, Runtime 60 hours, Distance 9 meters, Intensity 20 candela
RGB / Red Flash / Blue Flash / Red & Blue Flash: Output 0.5-1 lumen, Runtime —, Distance —, Intensity —
UV Light: Output 580mW @ 365nm, Runtime —, Distance —, Intensity —
Red Laser: Output ≤ 0.39mW, Runtime —, Distance —, Intensity —

Impact Resistance: 1 meter Waterproof: IP66

Operating Instructions

White Light Mode: Press and hold the neck-mounted switch for 0.5 seconds to turn on. Single click to cycle Eco → Low → Med → High. Press and hold 0.5 seconds to turn off.

UV Light Mode: Press and hold the side purple switch for 0.5 seconds to turn the UV light on/off.

Red Laser Mode: Press and hold the side red switch for 0.5 seconds to turn the red laser on/off.

Breathing Light: With the light off, double-click the neck-mounted switch to turn it on; single click to cycle RGB → Red flash → Blue flash → Red & blue flash. Press and hold 0.5 seconds to turn off.

Lock/Unlock: With the light off, press and hold the side purple and side red switches simultaneously for 2 seconds to lock (blinks twice on Eco) or unlock (activates on Eco).

Intelligent Memory Circuit: The light memorizes and recalls the last-used White light output.

Charging

Turn off the light and connect the USB Type-C charging cable.
Indicator glows red while charging and turns green when fully charged.
Unplug the cable once charging completes. Only Eco output can run while charging.

Battery Level Indication

Green light on: 100%-85% (saturated)
Green light flashing: 85%-50% (sufficient)
Red light on: 50%-25% (poor)
Red light flashing: 25%-1% (critical)

Intelligent Overheat Protection

The light steps down output automatically once it reaches 65°C/149°F or above on high output levels; it gradually recalls the preset level once cooled.

Low-Voltage Warning

The light downshifts brightness automatically until Eco is reached; in Eco the indicator blinks red to prompt a recharge.

Usage and Maintenance

Fully charge the light before its next use.
Recharge a stored light every four months to preserve battery performance.

What's Included

Fenix E06R flashlight, USB Type-C charging cable, lanyard, key chain ring, user manual, warranty card

Warnings

Keep out of reach of children.
Disassembling the sealed head can damage the light and voids the warranty.
Do not shine the light directly into anyone's eyes.
The light shell can become hot during extended use — handle with care to avoid burns.
Do not place the light head near flammable objects.
Lock the light before placing it in pockets or backpacks to prevent accidental activation.
Do not hold the light in your mouth or use it in other unintended ways.
The LEDs are not replaceable; the whole light must be replaced at end of LED life.

Was this article helpful?

Yes