Fenix E09R Reference ManualUpdated an hour ago

The Fenix E09R is a rechargeable high-output EDC flashlight. This summary is drawn from the manufacturer's official user manual — see the downloadable PDF reference manual on the product page for complete details.

Overview

The E09R delivers up to 600 lumens maximum output and 124 meters maximum beam distance from a Luminus SST20 LED rated for a 50,000-hour lifespan, powered by a built-in 800mAh Li-polymer battery charged through a hidden USB Type-C port.

• 600 lumens maximum output, 124 meters maximum beam distance.
• Luminus SST20 LED with a lifespan of 50,000 hours.
• Built-in 800mAh Li-polymer battery.
• Hidden USB Type-C charging port.
• Metal switch for on/off and output selection.
• Instant Burst mode.
• High-efficiency lens with a total reflective coating.
• Made of durable A6061-T6 aluminum with premium type HAIII hard-anodized anti-abrasive finish.
• Size: 3.11" x 0.76" x 0.72" / 79 x 19.3 x 18.4 mm.
• Weight: 1.59 oz / 45 g.

Operating Instructions

On/Off: Press and hold the side switch for 0.5 seconds to turn on/off the light.

Output Selection: With the light switched on, single click the side switch to cycle through Moonlight → Low → Med → High.

Instant Burst: Press and hold the side switch for 1.2 seconds to enter Instant Burst; release it and the light returns to Moonlight mode.

Lock/Unlock: With the light off, double click the switch within 0.5 seconds to lock (blinks twice on Moonlight); double click again to unlock.

Intelligent Memory Circuit: The light memorizes the last selected output (excluding Burst) and recalls it next time it is turned on.

Charging

Loosen the light body to reveal the USB Type-C charging port and plug the USB-A end into an electrical outlet, then connect the Type-C end to the light. The indicator displays red while charging and turns green when full. Tighten the light head back down after charging to maintain dustproof and waterproof ability. Normal charging time is about 1 hour from depletion to full. Recharge a stored light every four months.

Intelligent Overheat Protection

The light accumulates heat on High for extended periods. At 60°C or above it automatically steps down a few lumens; below 60°C the mode may be reselected.

Technical Parameters (ANSI/PLATO FL1)

• Burst: Output 600 lumens, Distance 124 m, Intensity 3970 cd, Impact Resistance 1 m, Submersible IP68
• High: Output 300 lumens, Runtime 1.5 hours*, Distance 91 m, Intensity 2084 cd, Impact Resistance 1 m, Submersible IP68
• Med: Output 100 lumens, Runtime 4 hours, Distance 56 m, Intensity 777 cd, Impact Resistance 1 m, Submersible IP68
• Low: Output 25 lumens, Runtime 16 hours, Distance 28 m, Intensity 192 cd, Impact Resistance 1 m, Submersible IP68
• Moonlight: Output 3 lumens, Runtime 70 hours, Distance 9 m, Intensity 20 cd, Impact Resistance 1 m, Submersible IP68

Specifications are Fenix lab testing results using the built-in 800mAh Li-polymer battery at 21±3°C and 50–80% humidity. *High output runtime includes output at reduced levels due to the temperature protection mechanism.

Usage and Maintenance

• Disassembling the sealed head can cause damage to the light and will void the warranty.
• Lock the light to prevent accidental activation during storage or transportation.
• Long-term use can result in O-ring wear; replace with an approved spare to maintain a proper water seal.

What's Included

Fenix E09R flashlight, USB Type-C charging cable, key chain, spare O-ring, user manual, warranty card.