Fenix Support logo
Fenix Support logo
All articles

Fenix HT30R Reference ManualUpdated an hour ago

The Fenix HT30R is a high-performance white laser flashlight that has been discontinued. This article preserves the reference manual information for existing owners. You can still view the original listing on the product page.

Warnings

  • This flashlight is fitted with white laser light (Laser Classification: Class 1). Improper use may cause visual impairment or skin burns.
  • Do not shine the flashlight directly into the eyes of anyone, to prevent visual impairment.
  • Do not stare at the facula (light spot) for a long time at a close distance, to prevent visual impairment.
  • Do not illuminate the skin for a long time, to prevent skin burns.
  • Non-professional people are prohibited from disassembling this product.
  • Keep this light out of the reach of children.
  • Do NOT shine the light at flammable objects at close range, to avoid burning objects or causing danger due to high temperature.
  • Do NOT use the light in inappropriate ways, such as biting it in the mouth, to avoid personal injury or life threats if the light or internal battery fails.
  • This light will accumulate a lot of heat while working, resulting in a high temperature of the flashlight shell. Pay attention to safe use to avoid scalding.
  • Turn off and lock the light, or remove the battery from the light, to prevent accidental activation when the light is placed in a closed and flammable environment such as a pocket or backpack.
  • The LED of this flashlight is not replaceable, so the whole light should be replaced when the LED reaches the end of its life.
  • Lithium-ion batteries are powerful cells and must be treated with caution and handled with care. Only use quality batteries with circuit protection, which will reduce the potential for combustion or explosion; cell damage or short-circuiting remain potential risks the user assumes. It is prohibited to use 18650, 16340, or CR123A batteries in this light.

Product Features

  • 500 lumens maximum output, 1500 meters maximum beam distance
  • Fitted with a set of 10W high-performance white laser module
  • Includes a Fenix ARB-L21-5000 V2.0 Li-ion battery
  • Instant activation and instant strobe with dual tail switch
  • Hidden USB Type-C charging port
  • Internal dual-spring structure ensures stable lighting even under severe impact
  • Boot-up battery level indication for instant checking of remaining battery level
  • Made of A6061-T6 aluminum with a premium type HAIII hard-anodized anti-abrasive finish
  • Size: 7.05" x 1.57" x 1.02" / 179 x 40 x 26 mm
  • Weight: 9.31 oz / 264 g (including battery)

Technical Parameters

  • High output: 500 lumens, 2 hours 20 minutes runtime, 1500 meters beam distance, 600,000 candela
  • Low output: 100 lumens, 7 hours 15 minutes runtime, 630 meters beam distance, 100,000 candela
  • Strobe output: 500 lumens
  • Impact resistance: 1 meter
  • Waterproof rating: IP68 (submersible)
  • Note: the above specifications are measured by Fenix in lab testing using the included Fenix ARB-L21-5000 V2.0 Li-ion battery at 21±3°C and 50%-80% humidity. Actual performance may vary depending on the battery used and the working environment.

Battery Specifications

  • Battery type: Fenix ARB-L21 series, 21700 size, 3.6V nominal voltage — recommended and included
  • It is prohibited to use 18650, 16340, or CR123A batteries in this light
  • 21700 Li-ion batteries are powerful cells; use only quality, protected batteries and handle with care

Operating Instructions

  • The round tail switch is the tactical switch for instant activation. The oval tail switch is the functional switch for output selection and instant strobe.
  • On/Off: Tap the tactical switch to silently and momentarily turn on the light; release and the light will go out. Fully press the tactical switch to constantly turn on the light; press again and the light will go out.
  • Output Selection: With the light switched on, single-click the functional switch to cycle through Low → High.
  • Strobe: With the light switched on, press and hold the functional switch for 0.5 seconds to enter strobe; click the functional switch once again to return to the general mode. With the light switched off, press the functional switch to momentarily enter strobe; release and the light will go out.
  • Intelligent Memory Circuit: The light memorizes the last selected mode, excluding Strobe. When turned on again, the previously used mode will be recalled.
  • Battery Replacement: Unscrew the light tail and insert the battery with the anode side (+) towards the light head, then screw the light tail back on.
  • Low-Voltage Warning: When the voltage level drops below the preset level, the flashlight downshifts to a lower brightness level until Low mode is reached. In Low mode, the light will blink 3 times every 5 minutes to remind you to recharge or replace the battery. This only works with the Fenix ARB-L21 series 21700 rechargeable Li-ion battery.
  • Intelligent Overheat Protection: The light will accumulate a lot of heat when used on High mode for extended periods. When the light reaches a temperature of 60°C or above, it will automatically step down a few lumens to reduce the temperature. When the temperature drops below 60°C, it will allow reselection of High mode.

Charging

  • Loosen the light head counterclockwise to reveal the USB Type-C charging port, plug the USB-A end of the charging cable into an electrical outlet, then connect the USB Type-C end of the charging cable to the light.
  • The indicator will display red while charging and will turn green when fully charged.
  • Once charging is completed, be sure to tighten the light head to maintain dustproof and waterproof ability.
  • If charging fails or the battery is reversely connected, the battery indicator will flash red to remind you to check the battery.
  • The normal charging time of the included Fenix ARB-L21-5000 V2.0 is approximately 3 hours from depletion to full charge. The light is unavailable while charging.
  • If the charging port is exposed or the light neck is not tightened, the battery indicator flashes and the light is unavailable.
  • Recharge a stored light every four months to maintain optimum battery performance.
  • Charging notes only apply to the Fenix ARB-L21 series 21700 rechargeable Li-ion battery.

Battery Level Indication

  • Unscrew the light neck to see the battery indicator. Each time the light is turned on, the battery indicator will flash to show the remaining battery power.
  • Green light flashes: 100% - 30% remaining
  • Red light flashes: 30% - 1% remaining
  • This only works with the Fenix ARB-L21 series 21700 rechargeable Li-ion battery.

Usage and Maintenance

  • Disassembling the sealed head can cause damage to the light and will void the warranty.
  • Fenix recommends using only a high-quality protected battery.
  • If the light will not be used for an extended period, remove the battery for proper storage.
  • Unscrew the tail cap or remove the battery to prevent accidental activation during storage or transportation.
  • Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare.
  • Periodic cleaning of the battery contacts improves the light's performance, as dirty contacts may cause the light to flicker, shine intermittently, or even fail to illuminate. Possible causes: (A) Poor battery level — recharge or replace the battery; (B) The contact points of the battery or flashlight are dirty — clean the contact points with a cotton swab soaked in rubbing alcohol.
  • If the above methods don't work, please contact your authorized distributor.

What's Included

  • Fenix HT30R Flashlight
  • Fenix ARB-L21-5000 V2.0 Li-ion battery
  • USB Type-C charging cable
  • Holster
  • Lanyard
  • 2 x Spare O-rings
  • User manual
  • Warranty card
Was this article helpful?
Yes
No