Fenix Support logo
Fenix Support logo

All articles

Fenix WF30RE Reference ManualUpdated an hour ago

The Fenix WF30RE is an intrinsically safe, explosion-proof flashlight built for use in hazardous, potentially explosive environments. Below is the full reference manual content for the the product page.

Technical Parameters

  • General Mode - High: 300 lumens, 7 hours 18 minutes runtime, 149 meter beam distance, 5572 candela peak intensity
  • General Mode - Medium: 100 lumens, 22 hours 53 minutes runtime, 86 meter beam distance, 1880 candela peak intensity
  • Extreme Mode - Low: 30 lumens, 68 hours runtime, 47 meter beam distance, 550 candela peak intensity
  • Extreme Mode - Eco: 5 lumens, 313 hours 22 minutes runtime, 19 meter beam distance, 93 candela peak intensity
  • Extreme Mode - SOS: 30 lumens
  • Impact resistance: 1 meter
  • Water resistance: IP68 submersible
  • Weight: 7.69 oz / 218 g (including battery)
  • Dimensions: 5.97" x 1.34" x 1.10" / 151.7 x 34 x 28 mm
  • Body material: durable A6061-T6 aluminum alloy
  • LED: one CREE XP-G3 LED with a rated lifespan of 50,000 hours (not user-replaceable)

Note: performance figures are measured according to the ANSI/PLATO FL1 standard using one Fenix ARB-L21-3000Ex rechargeable battery at 21±3°C and 50%-80% humidity. Actual performance may vary with the battery used and the working environment. The High output runtime figure includes output at the reduced level the light automatically steps down to once it reaches its thermal cutoff.

Warnings / Safety Certification

  • This is an intrinsically safe, explosion-proof flashlight rated for use in Zone 1 and Zone 2 hazardous locations where the surrounding gas mixture belongs to explosion group IIA, IIB, or IIC, and in combustible dust areas Zone 21 and Zone 22.
  • Explosion-proof certifications: IECEx (IECEx TUR 18.0042X, Ex ib IIC T4 Gb, Ex ib IIIC T130°C Db), ATEX (TÜV 18 ATEX 8252 X, II 2G Ex ib IIC T4 Gb, II 2D Ex ib IIIC T130°C Db IP66/IP68), and GRGT (GRGT25.0014X, Ex ib IIC T4 Gb, Ex ib IIIC T130°C Db).
  • Do NOT open the light in explosive atmospheres.
  • Do NOT recharge or replace the battery in explosive atmospheres.
  • Any unauthorized/self-made modification to the unit may impair its intrinsic safety.
  • Do NOT shine the light directly into anyone's eyes; this is a high-intensity lighting device.
  • Do NOT place this light within reach of children.
  • Do NOT use the light in inappropriate ways, such as holding the unit in your mouth - doing so could cause serious personal injury or death if the light or internal battery fails.
  • This light will accumulate significant heat while operating, resulting in a high temperature of the light shell. Pay close attention to avoid burns.
  • The LED is not replaceable; the whole light will need to be replaced once the LED reaches the end of its lifespan.
  • Do not use the flashlight if any part is missing (especially the dust cap of the charging socket) or if the shell is visibly damaged.
  • All information in the manual is subject to change without prior notice.

Product Features

  • Intrinsically safe, explosion-proof flashlight design
  • Utilizes one CREE XP-G3 LED with a lifespan of 50,000 hours
  • 300 lumens maximum output
  • Powered by one Fenix ARB-L21-3000Ex rechargeable battery
  • USB Type-C charging port located on the light neck
  • Multiple explosion-proof certifications: IECEx, ATEX, and GRGT
  • Boot-up battery level indication and low-voltage warning
  • Made of durable A6061-T6 aluminum alloy material
  • Intelligent memory circuit that recalls the last-selected output level (excluding SOS)

Operating Instructions

  • On/off: with the light off, press and hold the switch for 0.5 seconds to turn on and enter General mode.
  • With the light off, double click the switch to turn on the light and enter Extreme mode.
  • With the light on, press and hold the switch for 0.5 seconds to turn it off.
  • Output selection (General mode): single click the switch to cycle through Low - Medium - High.
  • Output selection (Extreme mode): single click the switch to select between Eco and SOS.
  • Intelligent memory circuit: the light memorizes the last-selected output level for General and Extreme mode, excluding SOS. When turned on again, the previously used output is recalled. If the light was previously turned off on Eco or SOS output, it will activate on Eco output the next time it's turned on.
  • Battery level check: with the light off, single click the switch to check battery status. The indicator in the switch displays battery status for 3 seconds - green solid: 100%-85%, green flashing: 85%-50%, red solid: 50%-25%, red flashing: 25%-1%.
  • Low-voltage warning: when the battery voltage drops below the preset level, the light automatically downshifts to a lower brightness level until Low output is reached. Once in Low output, the battery indicator blinks red to remind the user to recharge or replace the battery.

Battery Specifications

  • For safety, only use a genuine Fenix ARB-L21-3000Ex rechargeable lithium-ion battery in this light.
  • Do not open the light or replace the battery in an explosive atmosphere.
  • Use only the specific charger provided by the manufacturer, Fenixlight Limited.

Charging

  • Battery replacement: open the light tail with an 8 mm Allen wrench, insert a Fenix ARB-L21-3000Ex battery with the electrode facing the light head, then screw the tail back on.
  • Do not open the light, recharge it, or change the battery in explosive atmospheres.
  • Specific conditions of use for hazardous areas: do not open the light or replace the battery when an explosive atmosphere is present; use only the Fenix ARB-L21-3000Ex rechargeable li-ion battery; do not charge the battery in a hazardous location; use only the specific charger provided by Fenixlight Limited.

Usage and Maintenance

  • Disassembling the sealed head can damage the light and will void the warranty.
  • Only use a genuine Fenix ARB-L21-3000Ex battery in this light.
  • If the light will not be used for an extended period, remove the battery, or the light could be damaged by electrolyte leakage.
  • Ambient operating temperature range: -20°C to 45°C.
  • The included battery has no memory effect and can be recharged as soon as it's near depletion without concern for the battery.
  • Long-term use can cause O-ring wear. To maintain a proper water seal, replace the O-ring with an approved spare.
  • Ambient pollution degree: 3. Overvoltage category: II.

What's Included

  • Fenix WF30RE flashlight
  • Fenix ARB-L21-3000Ex battery
  • Charging adapter
  • Charging cable
  • EU Declaration of Conformity
  • Spare O-ring
  • Lanyard
  • User manual
  • Warranty card
Was this article helpful?
Yes
No