Fenix Support logo
Fenix Support logo

All collections

Fenix PD32 V2 FAQs

9 articles

Everything you need to know about your Fenix PD32 V2 LED flashlight

Articles

Can I use the ARB-L18-3500 18650 battery in the Fenix PD32 (V1) or the PD32 V2 LED flashlights?

Yes, the ARB-L18-3500 is a great battery to use in the Fenix PD32 (V1) or the PD32 V2 LED flashlights. 18650 batteries with built-in USB ports are not recommended with the PD32 V2.

Does the PD32 V2 feature overheat protection?

Yes the light will turn down in brightness if it reaches a temperature of 140° F (60° C). Once the light has cooled below that level, you will have access to all brightness levels again.

Is there a remote pressure switch for the Fenix PD32 (V1) and PD32 UE flashlight?

Yes, both the AER-01 and AER-02 V2 remote pressure switch will work for the Fenix PD32 (V1) and PD32 UE. Please check our accessory compatibility list to see what accessories are compatible with which flashlight.

What batteries work in the Fenix PD32 (V1) flashlight?

The Fenix PD32 (V1) flashlight is compatible with one 18650 li-ion battery or two non-rechargeable CR123 lithium batteries.

What batteries work in the Fenix PD32 V2 edc flashlight?

The PD32 V2 is compatible with a single 18650 lithium-ion battery or two CR123 lithium batteries. 18650 batteries with built-in USB ports are not recommended.

What flashlight would you recommend for keeping in my car?

We recommend using the Fenix PD32 for a car flashlight due to its compact size and simple user interface. However, if you plan to keep batteries in this flashlight while in the car we recommend only using CR123 batteries because they will not drain s

What is the beam angle of the PD32 V2?

The PD32 V2 features a two-part beam with a center hot spot and wider flood ring. The hot spot beam angle is 6.8° and the flood ring beam angle is 62°

Which battery chargers will work with the Fenix PD32 (V1) batteries?

You can use the chargers listed below to charge 18650 lithium ion batteries: ARE-X1, ARE-X2, ARE-A4, ARE-A2, ARE-D1, ARE-D2, ARE-X11.

Which gun mount will fit the Fenix PD32 (V1) flashlight?

Both the ALG-00 and ALG-01 (discontinued) gun mounts will work with the Fenix PD32 (V1).