What kind of LED is used in TK30R? Does Fenix offer to replace LED?
Fitted with a set of 10W high-performance white laser module.
Fitted with a set of 10W high-performance white laser module.
Around 6500K.
Voltage: 2.9V - 6.0V.
Yes, TK30R is rechargeable with a hidden USB Type-C port in the light neck.
The normal charging time is about 4 hours from depleted to fully charged with a 15 W or above charging adapter. The actual charging time can vary depending on the type of charging adapter, the battery's condition, and the surrounding temperature. If
There are two reasons:. 1. Intelligent Overheat Protection. The light will accumulate a lot of heat when used on High mode for extended periods. When the light reaches a temperature of 60°C or above, the light will automatically step down a few lumen
The reasons that may cause the light to flicker, shine intermittently or even fail to illuminate:. 1. Poor battery level. Solution: Recharge or replace the battery. 2. The contact or contact point of the battery or flashlight is dirty. Solution: Clea
It is recommended to use Fenix ARB-L21 Series battery. An 18650 battery can also be used with the ALF-18 battery adapter.