Fenix CL26R Troubleshooting StepsUpdated a day ago

If your light won't turn on or won't charge, be sure to remove the plastic insulation disc (please watch video) inside the flashlight body as soon as you get the light. Confirm that your batteries are good. Try using the battery in another device. Confirm that the batteries are inserted into the light facing the correct directions indicated on the cap. The Negative (-) end of the battery should be on the side near the battery cap. Click and hold the power switch for .5 seconds. A single click will not turn the light on, you must hold the button down. Confirm that the battery cap is screwed down all the way. Confirm that there is only one o-ring on the light. The o-ring that comes in the box is a spare. The light already has an o-ring on it when you first remove it from the box. If you put on the spare o-ring, please remove it as this will prevent the light from making a full connection with the batteries. Lubricate the o-ring using a small amount of petroleum jelly on the end of a cotton swab. After you have completed the above troubleshooting steps, if your light is still not working, visit our Warranty and Repair page (https://fenix-store.com/pages/warranty-info) to review the policy and submit a claim.