Fenix PD36 TAC Reference Manual and SpecificationsUpdated 5 hours ago

Mechanical Tactical Flashlight | 3000 Lumens Maximum Output | 274 Meters Max Beam Distance

Condensed from the manufacturer's official manual for the Fenix PD36 TAC. A downloadable PDF reference manual is also available on this product's page for complete details.

Safe Use Warnings

This flashlight is a high-intensity lighting device capable of causing eye damage to the user or others. Avoid shining the flashlight directly into anyone's eyes.
This flashlight will accumulate a lot of heat when used for extended periods, resulting in high temperature of the flashlight shell. Pay attention to safe use to avoid scalding.
The LED of this flashlight is not replaceable; the entire light should be replaced when the LED reaches the end of its life.
All information provided in this manual is subject to change without prior notice.

Fenix PD36 TAC Flashlight

3000 lumens maximum output; 274 meters maximum beam distance.
A Luminus SST70 LED with a lifespan of 50,000 hours.
Includes a 21700 rechargeable Li-ion battery.
Tactical and Duty modes for flexibly needed choice and operation.
Patented dual-function tactical switch for instantly tactical activation.
Single-handed toggle switch for mode selection.
Lockout function avoids accidental activation.
Reverse polarity protection, to protect from improper battery insertion.
Made of durable A6061-T6 aluminum with a premium type HAIII hard-anodized anti-abrasive finish.
Size: 5.51'' x 1.04'' x 1.00'' / 140 x 26.5 x 25.4mm.
Weight: 3.24 oz / 92 grams (excluding battery).

Technical Parameters (ANSI/PLATO FL1)

Tactical Mode

High: Output 2000 lumens, Runtime 3 h 10 min, Distance 225 m, Intensity 12,600 cd
Strobe: Output 2000 lumens
Turbo: Output 3000 lumens, Runtime 1 h 30 min*, Distance 274 m, Intensity 18,700 cd

Duty Mode

Turbo: Output 3000 lumens, Runtime 1 h 30 min*, Distance 274 m, Intensity 18,700 cd
High: Output 1000 lumens, Runtime 3 h 15 min, Distance 160 m, Intensity 6,400 cd
Med: Output 350 lumens, Runtime 10 h 10 min, Distance 92 m, Intensity 2,100 cd
Low: Output 150 lumens, Runtime 18 h 45 min, Distance 59 m, Intensity 900 cd
Eco: Output 30 lumens, Runtime 43 h 10 min, Distance 25 m, Intensity 160 cd
Strobe: Output 2000 lumens

Impact Resistance: 1 meter | Waterproof Rating: IP68

*The Turbo output is measured in total of runtime including output at reduced levels due to temperature or protection mechanism in the design. Specs measured by Fenix using one Fenix ARB-L21-5000U rechargeable Li-ion battery at 21±3°C / 50–80% humidity; real-world performance varies.

Operating Instructions

On/Off: With the light unlocked and switched off, tap the tactical tail switch to momentarily turn on the light, release it and the light will go out; fully press the tactical tail switch to constantly turn on the light (less than 0.8 seconds), press again to turn off the light.

Mode Switching: In any state, rotate the toggle switch to select the needed mode. Rotate the toggle switch clockwise to the end to enter Tactical mode, rotate the toggle switch anticlockwise to the end to enter Duty mode, or to the middle to enter Lockout mode.

Output Selection — Tactical Mode: Tap the tactical tail switch to momentarily turn on the light, fully press the tactical tail switch to lock the light on High output level. Press and hold the tactical tail switch for 0.8 seconds to enter Strobe, tap the tactical tail switch to turn back to High output level. Fully press the tactical tail switch to turn off the light.

Output Selection — Duty Mode: Tap the tactical tail switch to cycle through Eco → Low → Med → High → Turbo, fully press the tactical tail switch to lock the output level, tap again to cycle the output levels (with intelligent memory circuit). Press and hold the tactical tail switch for 0.8 seconds to enter Strobe, tap the tactical tail switch to return to the previously used output level. Fully press the tactical tail switch to turn off the light.

Instant Strobe: In Tactical or Duty mode, press and hold the tactical tail switch for 0.8 seconds to enter Strobe, fully press the tactical tail switch again to exit Strobe.

Lock: With the light switched on, rotate the toggle switch to the middle position to lock the chosen output level; at this time, the tactical switch does not work and the output levels can not be selected. With the light switched off, rotate the toggle switch to the middle position to lock the tactical tail switch; at this time, the tactical switch does not work and the light can not be turned on.

Unlock: Rotate the toggle switch to Tactical mode or Duty mode to unlock the light.

Battery Specifications

Fenix ARB-L21-5000U (21700, 3.6V): Recommended
Fenix ARB-L21-4000P (21700, 3.6V): Recommended
Rechargeable Li-ion (21700, 3.6V, non-Fenix): Caution

21700 Li-ion batteries are powerful cells designed for commercial applications and must be treated with caution and handled with care. Only use quality batteries with circuit protection to reduce the potential for combustion or explosion; cell damage or short-circuiting are potential risks the user assumes.

Battery Replacement: Unscrew the tail cap to insert the battery with the anode side (+) towards the light head, then screw the tail cap back on.

Intelligent Overheat Protection

The light will accumulate a lot of heat when used on higher output levels for extended periods. When the light reaches a temperature of 60°C or above, the light will automatically step down a few lumens to reduce the temperature. When the temperature drops below 60°C, it will then allow the user to reselect higher modes.

Low-Voltage Warning

When the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level until Eco output is reached. When this happens in Eco output, the light blinks 3 times every 5 minutes to remind you to recharge or replace the battery.

Note: This only works with a Fenix ARB-L21 Series 21700 rechargeable Li-ion battery.

Usage and Maintenance

Disassembling the sealed head can cause damage to the light and will void the warranty.
Fenix recommends using an excellent quality battery.
If the light will not be used for an extended period, remove the battery, or the light could be damaged by electrolyte leakage or battery explosion.
Lock the light or remove the battery to prevent accidental activation during storage or transportation.
Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare.
Periodic cleaning of the battery contacts improves the lamp's performance, as dirty contacts may cause flickering, intermittent shining, or failure to illuminate. If the battery needs replacing, replace the battery pack (ensure it's inserted per the manufacturer's specifications). If the contacts are dirty, clean them with a cotton swab soaked in rubbing alcohol. If the above methods don't work, contact your authorized distributor.

Included

Fenix PD36 TAC flashlight, ARB-L21-5000U rechargeable Li-ion battery, USB Type-C charging cable, holster, spare O-ring, user manual, warranty card.

FENIX LIGHT STORE LLC
Original US Retailer of Fenix Light Products (since 2006)
Web: www.fenix-store.com Email: [email protected] Phone: 877-449-3301

This reference manual is provided by Fenix Store for customer convenience and is based on the manufacturer's (Fenixlight Limited) official product documentation.

Was this article helpful?

Yes