Fenix TK16 V2 Troubleshooting StepsUpdated 2 hours ago

These troubleshooting tips work with the TK15UE as well as the older discontinued TK15Confirm that your batteries are good. Try using the battery in another device. Confirm that the battery/batteries are inserted into the light facing the correct direction. The Positive (+) side should be toward the head (LED) of the flashlight. Confirm that there is only one o-ring on the light. The o-ring that comes in the box is a spare. The light already has an o-ring on it when you first remove it from the box. If you put on the spare o-ring, please remove it as this will prevent the light from making a full connection with the batteries. Lubricate the o-ring using a small amount of petroleum jelly on the end of a cotton swab. Confirm that the tactical ring is on completely tight on the body of the flashlight. Loosen the tail cap before tightening down the tactical ring. If the tail cap is tightened down to the tactical ring, it can prevent the ring from moving. Confirm that the tail cap piece is completely tight on the body of the flashlight. If the light is still not working after tightening the tactical ring and the tail cap, try to flip the tactical ring around. Perform troubleshooting as suggested on our general "Troubleshooting Your Flashlight" page. After you have completed the above troubleshooting steps, if your light is still not working, visit our Warranty and Repair page (https://fenix-store.com/pages/warranty-info) to review the policy and submit a claim.