Fenix E-Lite FAQs

My Fenix E-Lite blinks twice when I try to turn it on. What's going on?

When the E-Lite is locked out it blinks twice and the battery level indicator will glow when you try to turn it on. To unlock the light, double press the switch.

How do you operate the Fenix E-Lite?

To turn on the white LED, press and hold the switch for 0.5 seconds. From there, single click to cycle through the white outputs. They go as follows: low - med - high. To access the red and blue LED on the E-Lite, press and hold the switch for 1.2 se

How do you change to the colored LEDs on the Fenix E-Lite?

To access the red and blue LED on the E-Lite, press and hold the switch for 1.2 seconds and the red LED will come on. From there, single click to cycle through the different outputs. They go as follows: red - red flash - blue - blue flash.

What batteries can be used in the E-LITE

The E-LITE includes a built-in rechargeable 275mAh Li-polymer battery. The battery cannot be removed, and no other batteries may be used

Does the E-LITE feature overheat protection?

Yes, the light may accumulate heat while in use in the High output. If the light reaches a temperature of 140° F (60° C) the output will step down a few lumens to reduce the temperature. Once the temperature drops below this threshold you may select

What is the beam angle of the E-LITE?

The E-LITE features red and blue LEDs and the white LED features a two-part beam with both spot and flood characteristics. The white light features a central hotspot angle of 24° and a flood ring angle of 80°. The colored lights have a beam angle of