Fenix LD45R FAQs

What kind of LED is used in LD45R?

Luminus SFT70 LED with a lifespan of 50,000 hours.

What is the color temperature of LD45R?

Around 6500K.

What are the working voltage and the working current of LD45R?

The working voltage is 2.8 V - 4.2 V and the maximum working current is 15 A.

What is the runtime of the Turbo output?

The runtime of Turbo output is 2 hours 40 minutes. However, the light will accumulate a significant amount of heat used at Turbo output. When the light reaches a certain temperature, the light will automatically step down a few lumens to reduce the t

Is LD45R rechargeable? How long is the charging time?

Yes, LD45R is rechargeable with a USB Type-C port. While charging, please follow the steps below:. Open the anti-dust cover to reveal the charging port, then connect the USB Type-C end of the charging cable to the flashlight. When charging, the OLED

Why does the LD45R downshift to a lower mode after being used for a while and the higher mode cannot be selected?

There are two reasons:. 1. Intelligent Overheat Protection. The flashlight will accumulate a lot of heat when used at high output levels for extended periods. When the light reaches a temperature of 60°C or above, the light will automatically step do

Why does the LD45R happen to flicker?

The reasons that may cause the light to flicker, shine intermittently or even fail to illuminate:. 1. Poor battery level. Solution: Recharge or replace the battery. 2. The contact or contact point of the battery or light is dirty. Solution: Clean the

What kind of battery can be used in LD45R? Why does the Turbo output cannot be selected while using a Fenix ARB-L21-5000 battery or a Fenix ARB-L21-5000U battery?

It is recommended to use a Fenix ARB-L21-5000 V2.0 battery. The Fenix ARB-L21-5000 and the Fenix ARB-L21-5000U batteries are not compatible with the LD45R flashlight because their minimum overcurrent protection values are 14 A. The LD45R flashlight h