What kind of LED is used in PD32R?
A Luminus SFT40 LED with a lifespan of 50,000 hours.
A Luminus SFT40 LED with a lifespan of 50,000 hours.
Around 6500K.
The operating voltage is 2.9 - 6.0 V. The max operating current is 5.2 A.
Loosen the light tail, or remove the battery to prevent accidental activation.
Yes. Loosen the light neck to reveal the USB Type-C charging port and battery level indicator. The indicator will display red while charging and will turn green when fully charged. The normal charging time is approximately 3 hours from depleted to fu
There are two reasons:1. Intelligent Overheat ProtectionThe flashlight will accumulate a lot of heat when used at high output levels for extended periods. When the light reaches a temperature of 60°C or above, the light will automatically step down a
The reasons that may cause the light to flicker, shine intermittently or even fail to illuminate:1. Poor battery level.Solution: Recharge or replace the battery.2. The contact or contact point of the battery or flashlight is dirty.Solution: Clean the
It is recommended to use a Fenix ARB-L18-3400 battery, or two CR123A batteries. While using two CR123A batteries, the actual max output is 800 lumens, the max beam distance is 270 meters and the max runtime is 30 hours at Low output. OtherLi-ion batt