Everything you need to know about the various Fenix flashlight accessories
Any flashlight that fits our ALG-00 and ALG-01 could be considered a "weapon light." There is not an official designation of what defines a "weapon light" but if it fits in either of those weapon mounts it could be mounted on any rifle that features
We do sell flashlight parts and accessories including holsters. Please reach out to us by filling out our Contact Us form to see if we have the holster you want in stock.
Yes, we do sell flashlight parts and accessories including pocket clips. Please reach out to us by filling out our Contact Us form to see if we have the pocket clip you want in stock.
No, we do not have cable extension for our Fenix headlamps or bike lights.
Depending on which Fenix flashlight you own, you may be able to purchase the Fenix AB02 belt clip. Check out the accessory compatibility list to see if your Fenix light is compatible. Many Fenix flashlights come with a pocket clip and/or a holster wh
Yes we do offer replacement headbands for purchase. Please contact our customer service department through our Contact Us form to see if the headband you need is available.
We do sell flashlight parts and accessories. Please contact us to check if we have the item you're looking for in stock.
We do sell the Fenix BA4C battery case. Please contact us to check if we have the item you're looking for in stock.
Yes, you can access strobe, momentary-on, constant-on, and cycle through the different brightness modes using the AER-03 remote pressure switch on the Fenix TK16 (V1) flashlight. Check out our Fenix TK16 tactical flashlight review.
Yes, you are able to purchase spare parts through our customer service team by filling out our Contact Us form. If you're interested in an extra bike mount, please reach out to us for further details.
Fenix flashlights and lanterns with included batteries come pre-packaged and therefore the batteries cannot be exchanged before shipping. You will need to buy these batteries separately in addition to the item. This will grant you backups in case you
We do not have a gun mount that is compatible with the Fenix PD25 due to its size. This information may change in the future.
We do not have protective cases for 14500 batteries, but we do have other battery storage options.
No, we do not have any storage cases for 26650 batteries. Browse our other battery storage options. This information may change in the future.
Unfortunately, we do not have any lights that have a head with a diameter of 28mm, so we do not have a filter that will fit. The closest one would be our AOF-S+. This information may change in the future.
We have multiple wands for our Fenix flashlights that you can find here. If you're looking for a wand for your specific flashlight, check our Accessory Compatibility List to find which wand works for you.
There are a few options we have for holsters. If you would like to purchase the same holster that your light came with, please reach out to us using our Contact Us form to see if we have the specific item you're looking for. Otherwise, we also have t
The Fenix HL40R headlamp is our only headlamp that can fit a filter or diffuser. Check out the HL40R and the diffusers . This information may change in the future.
We are out of stock and no longer sell the NW20 whistle. It has been discontinued and is no longer in production.
No, the only bike mount that is compatible with the Fenix BC21R bike light is the one that it comes with. The BC21R is discontinued, but you can view the upgraded Fenix BC21R V2.0 bike light.
The dust covers on most Fenix rechargeable lights are not able to be easily changed. You may have to send the light in for repair in order to get the dust cover replaced. Please check the troubleshooting page for your specific model and contact us to
All Fenix remote pressure switches have two buttons, a power switch and a pressure switch.The AER-01, AER-02 V2, and AER-03 V2 all work on different flashlights that use 18650 batteries. The AER-01's pressure switch will only access a momentary-on fu
We often have spare velcro strips for our pressure switches that are available to purchase. Please contact us using the Contact Form and we'll be happy to assist you!
To achieve the waterproofing, you will need to tighten the lid down as far as you can. It is hard to say for sure if you can have it just less than fully tighten but you can actually test this if you wish. You can simply test it by making it fully dr
No, the BC21R (V1) uses a unique rubber strap handlebar mechanism and therefore is not compatible with the other mounts that Fenix makes.
Yes, both the AER-01 and AER-02 V2 remote pressure switch will work for the Fenix PD32 (V1) and PD32 UE. Please check our accessory compatibility list to see what accessories are compatible with which flashlight.
Yes, the Fenix AER-02 V2 remote pressure switch will work with the FD30 flashlight.
We have several options of small Fenix flashlights that fit with the Fenix AD301 red filter: Fenix RC09, Fenix LD11, Fenix LD12, Fenix LD22. Learn more about which accessory is compatible with which flashlight by checking our Accessory Compatibility
All Fenix flashlights are covered under a Limited Lifetime Warranty. "Limited" refers to the fact that the warranty has a full-coverage warranty for a set period of time where both parts and labor are covered and then a limited warranty after that fo
The ALF-18 battery holder lets you use 18650 li-ion batteries in many Fenix flashlights that use 21700 batteries. Below you'll find a list of Fenix models that are compatible with the ALF-18:
The Fenix AFH-02 headband is compatible with all current Fenix Headlamp Models except the HL40R.
The APB-20 storage bag will fit the following headlamps:. HL10HL12RHL15HL16HL18RHL23HL26RHL30HL32RHL35HL40RHL50HL55HL60RHM50R
While both the Fenix AER-02 V2 and AER-03 V2 remote pressure switches are very similar, they each fit different Fenix flashlight models with different body diameters. To find out which remote pressure switch would work with your Fenix flashlight, che
The ALG-05 remote pressure switch mount is compatible with the AER-02 V2, the AER-03 V2, and the AER-05.
Any Fenix bike light that uses the current standard bike mount as of 2019 will be compatible with the ALD-08 helmet mount. Here is a list of compatible bike lights: BC21R V2.0 / BC30R / BC25R / BC35R / BC30 / BC30 V2.0
Here is a list of Fenix flashlights that work with the ALP-10 flashlight holster:. With Head downward:TK Series: TK09, TK15, TK15C, and TK16, TK20R, TK22V2. With Head upward:SD Series: SD10. With the head upward/downwardPD Series: PD32, PD35 and PD36
The AOF-S+ filter is compatible with the Fenix PD30 flashlight. It comes in green, blue, and red.
You can easily see which filters will work with your Fenix flashlight by checking out the Accessory Compatibility List.
The Fenix AER-02 V2 remote pressure switch is compatible with the UC35 (V1) and UC35 V2.0 flashlights.
When you put a colored filter on a light, you get about 40% of the output.